387，476, 487，490系列Hawke防爆变径，防爆堵头，防爆呼吸阀等价格及库存
EPIN原装进口Hawke防爆格兰,Hawke防爆堵头,Hawke防爆变径接头,Hawke防爆电控箱等,广泛应用于石油石化和海洋钻井平台,有ATEX认证和ABS等认证。
387，476, 487，490系列Hawke防爆堵头价格及库存
EPIN原装进口Hawke防爆格兰,Hawke防爆堵头,Hawke防爆变径接头,Hawke防爆电控箱等,广泛应用于石油石化和海洋钻井平台,有ATEX认证和ABS等认证。
Hawke487 Domed Head Stopping Plug
Flameproof Exd / Increased Safety Exe / Dual Certified ATEX - IECEx
General Information
M16 to M130 as standard.
Other parallel thread options available on request, including BSPP, PG, NPSM and ET. NPT available as 387 Exe Plug.
Metric entry threads are 1.5mm pitch as standard.
Materials & Finishes
Manufactured in Brass, Nickel Plated Brass, Steel, Nickel Plated Steel and Stainless Steel. (Aluminium for Group II use only).
Technical Data
- Increased Safety and Flameproof Exe I Mb, Exd I Mb, Exe IIC Gb, Exd IIC Gb, Extb IIIC Db,
IM2 / II 2GD.
- Certificate Nos
baseefa11ATEX0149X and IECEx BAS 11.0071X. - Suitable for use in:
Zone 1, Zone 2, Zone 21, Zone 22 and mining applications. - Construction and Test Standards:
IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31. - Ingress Protection:
IP66. - Operating Temperature Range:
Nitrile ‘O’ Ring fitted as standard -60°C to 80°C.
Silicone Option -60°C to 160°C. - Group I, II and III.
| 487 STOPPING PLUGS SELECtION TABLE | |||
|---|---|---|---|
| Thread Size | Length of Thread | ‘S’ Dia. | Allen Key |
| M16 | 15 | 24 | 6 |
| M20 | 15 | 26.5 | 10 |
| M25 | 15 | 34 | 10 |
| M32 | 15 | 45 | 10 |
| M40 | 15 | 51.5 | 10 |
| M50 | 15 | 61.5 | 10 |
| M63 | 15 | 74.5 | 10 |
| M75 | 15 | 86.5 | 10 |
| All dimensions in millimetres. | |||
Ordering Format [ Product / Thread Size / Material / Finish ]
Example: 487 / M32 / Brass / Nickel Plated
Hawke387 Domed Head Stopping Plug
Increased Safety Exe / Dual Certified ATEX - IECEx
Application
To close unused cable gland entries and maintain the integrity of the equipment.
Materials & Finishes
387 Stopping Plugs are manufactured in Brass (standard), Nickel Plated Brass or 316 Stainless Steel..
Ordering Format [ Product / Thread Size ]
Example: 387 / ½" NPT
Technical Data
- Increased Safety Exe
II 2 GD IP66
- Certificate Nos
baseefa06ATEX0118U and IECEx BAS06.0029U - Construction and Test Standards:
IEC/EN 60079-0 and IEC/EN 60079-7. - Ingress Protection:
To meet with IP66 and IP67, the stopping plugs must be fitted perpendicular to the equipment face in a suitably sized threaded or plain hole and the equipment face must be smooth. Plain holes must be no larger than 0.7mm above the major diameter of the stopping plug thread and the plug must be held in place with a lock nut. A serrated washer may also be fitted. - Operating Temperature Range:
Nitrile ‘O’ Ring fitted as standard -60°C to 80°C.
Silicone Option -60°C to 160°C.
| 387 STOPPING PLUG SELECTION TABLE | ||
|---|---|---|
| Thread Size * | ‘S’ Dia. | Key Size (Across Flats) |
| ½" NPT | 30.0 | 8.0 |
| ¾" NPT | 36.5 | 10.0 |
| 1" NPT | 44.0 | 10.0 |
| 1¼" NPT | 56.0 | 10.0 |
| 1½" NPT | 62.0 | 19.0 |
| 2" NPT | 74.5 | 19.0 |
| 2½" NPT | 87.2 | 19.0 |
| 3" NPT | 104.0 | 19.0 |
| All dimensions in millimetres (except * where dimensions are in inches). | ||
Hawke479 Inline Adaptor (Male to Male)
Flameproof Exd / Increased Safety Exe / Dual Certified ATEX - IECEx
General Information
M16 to M75 as standard.
Other thread options available on request, including BSPP, PG, NPT, ET and NPSM.
Materials & Finishes
Manufactured in Brass, Nickel Plated Brass, Aluminium, Steel, Nickel Plated Steel and Stainless Steel.
Technical Data
- Increased Safety and Flameproof Exe IIC Gb, Exd IIC Gb, Extb IIIC Db,
II 2GD.
- Certificate Nos
baseefa11ATEX0150U and IECEx BAS 11.0072U. - Suitable for use in:
Zone 1, Zone 2, Zone 21 and Zone 22. - Construction and Test Standards:
IEC/EN 60079-0, IEC/EN 60079-1 IEC/EN 60079-7 and IEC/EN 60079-31. - Ingress Protection:
IP66. - Operating Temperature Range:
-60°C to 200°C. - Group I, II and III.
| 479 INLINE ADAPTOR SELECTION TABLE | ||||||
|---|---|---|---|---|---|---|
| Male Thread Size |
Thread Pitch |
Male Thread Size |
Thread Pitch |
Thread Length |
Across Flats |
Across Corners |
| M16 | 1.5 | M16 | 1.5 | 15 | 24 | 26.5 |
| M20 | 1.5 | M20 | 1.5 | 15 | 30 | 32.5 |
| M25 | 1.5 | M25 | 1.5 | 15 | 36 | 39.5 |
| M32 | 1.5 | M32 | 1.5 | 15 | 46 | 50.5 |
| M40 | 1.5 | M40 | 1.5 | 15 | 55 | 60.6 |
| M50 | 1.5 | M50 | 1.5 | 15 | 65 | 70.8 |
| M63 | 1.5 | M63 | 1.5 | 15 | 80 | 88.0 |
| M75 | 1.5 | M75 | 1.5 | 15 | 95 | 109.5 |
| All dimensions in millimetres. Note: Different thread sizes and types are permitted at each end of the adaptor, a step of one thread size is permitted between the male threads. Where different thread types / sizes are supplied, the overall dimensions of the adaptor may differ from the ones in the table |
||||||
Ordering Format [ Product / Thread Size / Material / Finish ]
Example: 479 / M32 Male x 1¼" NPT Male / Brass / Nickel Plated
Always state male thread first
上海颐品自动化科技有限公司